NanoStation M5 MIMO TDMA - 5 GHz
70.53 EUR / 84.64 EUR (20.00% VAT)
Buy pcs  
on stock
Warranty 12 months
NanoStation M5 is a powerful entire outdoor unit including 2 x 16 dBi antenna (MIMO) for the 5 GHz band. Unit allows for real communication speeds up to 150 Mbps. Another advantage is in addition to high data transfer rates thanks to the use of 802.11n standard time multiplex TDMA, which allows the unit in the AP to connect more than 300 clients, and low latency. Unlike predecessors NanoStation5 has a stronger processor stepping on the 400 MHz and greater memory. Web administration is very simple and clear. You can set as: AP mode, client or WDS traffic shaping QoS between WAN and LAN routing and transparent bridge, with or without NAT NAT antenna polarization (vertical / horizontal / adaptive) disable or enable the output to an external antenna signal strength, which correspond to the specific signaling LED output power up to 27 dBi Included is a 15 V power supply and PoE injector, which contains the reset button which can also indicate NS TFTP firmware recovery mode.

Specifications
Procesor: MIPS 24KC, 400 MHz
RAM: 32MB
NAND: 8MB
Default IP adress: 192.168.1.20
Default name: ubnt
Default password: ubnt
TX power settings: yes
Dimensions: 294 x 80 x 30 mm
Operation Mode: AP, Station, WDS
Max. Output power: 27 dBm
Receiver Sensitivity:: -96 dBm
Temperature: Operational: -30C to +80C
Radio Technology: 802.11a
Frequency Band: 5,4 - 5.825 GHz
Modulation: OFDM
Chipset: Atheros
Security: WEP 64/128/152, WPA, WPA2, 802.1X
LAN interface: 2x RJ45 10/100 Mbps
Transmission speed: 300 Mbps
DHCP: yes
Standards: 802.11a/n
Interface: LAN,WiFi
Supported OS: AirOS V
Polarization: H/V
Power supply: 15V, 0,8A

Your shopping cart is empty
User name:   Password: